Compaq DS20E - AlphaStation - 1 GB RAM User Manual page 121

set envar
The set command sets or modifies the value of an environment variable. It can also be
used to create a new environment variable if the name used is unique. Environment
variables are used to pass configuration information between the console and the
operating system. The setting of these variables determines how the system powers up,
boots the operating system, and operates. The syntax is:
set [-default] envar value
-default Restores an environment variable to its default setting.
envar The name of the environment variable to be modified.
value The new value of the environment variable.
Whenever you modify the value of any of the following environment variables, the
new value takes effect only after you reset the system by pressing the Reset button or
issuing the initialize command:
console
kbd_hardware_type
language
ocp_text
os_type
show envar
The show envar command displays the current value (or setting) of an environment
variable. The syntax is:
show envar
envar The name of the environment variable to be displayed. The wildcard *
displays all environment variables.
SRM Console 4-37