Compaq DS20E - AlphaStation - 1 GB RAM User Manual page 107

=========================================================================
handle: COM2
.
dev: 3
.
iobase0: 2f8 iobase1: 8000000000000000
.
dma0: 80000000
.
=========================================================================
handle: LPT1
.
dev: 4
.
iobase0: 3bc iobase1: 8000000000000000
.
dma0: 80000000
.
========================================================================
handle: FLOPPY
.
dev: 5
.
iobase0: 3f0 iobase1: 8000000000000000
.
dma0: 2 irq0: 6
.
=========================================================================
P00>>>
The isacfg command is used to display or modify the ISA bus configuration data. The
syntax is:
isacfg [-slot slot # ] [-dev device # ] [ {-all | -rm | -mk | -mod | -init } ] [-field value]
-slot slot # The PCI slot allocated to the ISA bus (0).
-dev device # The ISA device number allocated to the device upon which the
isacfg command is to operate.
-all Sets the default parameters to all devices on the ISA bus.
-rm Removes an ISA device from the ISA bus.
-mk
-init Initializes the device(s) indicated by the –dev or –all switches.
-field value The name of the field followed by the value to be deposited in
it.
irq0: 3
irq0: 7
SRM Console 4-23