Compaq DS20E - AlphaStation - 1 GB RAM User Manual page 213

1. Align the guides on the top and bottom inside of the side panel with the lip of
the system unit frame.
2. Tilt the side panel top toward the unit and lift the flange at the top of the panel
over the system unit frame.
3. Slide the panel forward into position. (Repeat steps 1 to 3 for the other panel.)
4. Align the top cover with the top of the side panels and slide the cover gently
onto the unit from the rear.
CAUTION: The top cover has a tab on the underside. Make sure to place this
tab in the area immediately behind the microswitch. Do not hit the microswitch
with the tab.
5. Hold down the top cover release latch until the top cover is in place, and then
release it to secure the cover and panels.
6. Lock the door to secure the top cover and side panels.
7. Set the On/Off switches on all external options connected to the system to the on
position.
8. Press the On/Off button on the system unit to the on position.
Installing Components 7-7