Compaq DS20E - AlphaStation - 1 GB RAM User Manual page 118

Example 4–20 Lfu Command (Continued)
UPD> list
Device Current Revision
Fsb 3.1-x
Nt 5.68
Pkx0 A11
Srm 5.4-x
Pua A214
UPD> update *
WARNING: updates may take several minutes to complete for each device.
Confirm update on: AlphaBIOS
AlphaBIOS Updating to V6.40-1... Verifying V6.40-1... PASSED.
Confirm update on: srmflash
srmflash Updating to V6.0-3... Verifying V6.0-3... PASSED.
UPD> exit
The lfu command starts the Loadable Firmware Update (LFU) Utility. The syntax is:
lfu
NOTE: If the system has been shut down from a booted program (most commonly, the
operating system) or in some other way halted back to the SRM console, the
system must be reset before running LFU.
See Chapter 3 for more information about LFU.
4-34 AlphaServer DS20 User's Guide
Filename
fsb_fw
nt_fw
kzpsa_fw
srm_fw
cipca_fw
[Y/(N)] y
DO NOT ABORT!
[Y/(N)] y
DO NOT ABORT!
Update Revision
3.x
5.xx
A11
5.4-xx
A2xx