Compaq DS20E - AlphaStation - 1 GB RAM User Manual page 137

ew*0_mode
Sets an Ethernet controller to run an AUI, ThinWire, or twisted-pair Ethernet network.
The default is auto-sense. For the fast setting, the device defaults to fast.
The syntax is:
set ew*0_mode value
The options for value are:
aui Device type is AUI.
auto-sense Device type is sensed by the console.
twisted-pair Device type is 10BaseT (twisted pair).
fast duplex, Device type is duplex 10BaseT
twisted-pair
fast Device type is fast SCSI
fast FD Device type is fast full duplex SCSI
BNC Device type is BNC
auto-negotiate DE500-BA
ew*0_protocols
Enables network protocols for booting and other functions. The syntax is:
set ew*0_protocols protocol_value
The options for protocol_value are:
mop (default) Sets the network protocol to mop (Maintenance Operations
Protocol), the setting typically used with the OpenVMS operating
system.
bootp Sets the network protocol to bootp, the setting typically used with
the DIGITAL UNIX operating system.
bootp,mop When both are listed, the system attempts to use the mop protocol
first, regardless of which is listed first. If not successful, it then
attempts the bootp protocol.
SRM Console 4-53