Compaq DS20E - AlphaStation - 1 GB RAM User Manual page 139

ocp_text
Specifies a message to display on the control panel after self-tests and diagnostics
have completed.
The value of ocp_text takes effect only after you reset the system by pressing the
Reset button or issuing the initialize command.
The syntax is:
set ocp_text message
The variable message can be up to 16 characters and must be enclosed in quotation
marks.
os_type
The os_type environment variable specifies the default operating system. This
variable is set at the factory to the setting for the operating system purchased. Use this
command to change the factory default setting.
Whenever you change the value of os_type, you must reset the system by pressing the
Reset button or issuing the initialize command.
The syntax is:
set os_type os_type
The options for os_type are:
unix DIGITAL UNIX is the default operating system, and the SRM firmware
is started during power-up or reset.
openvms OpenVMS is the default operating system, and the SRM firmware is
started during power-up or reset.
nt Windows NT is the default operating system. The SRM firmware is
started, and it loads and starts the AlphaBIOS firmware during power-
up or reset. (If a halt assertion condition exists, this environment
variable is overridden, and the SRM firmware does not load and start
the AlphaBIOS console.)
SRM Console 4-55