Fenix GS Installation Instructions Manual page 24

Not lit: the panel is switched off
Red: the panel is on and heats
Green: heated - the panel is on, but does not
heat
Orange: Timer mode has been activated
Green: RF pairing mode
Green-flashing: RF communication runs
Orange-flashing: no connection to V26 >2h
Red-flashing: no connection with RF sensor
>2h
Blue-flashing: local mode started
Purple: connected to Wifi router, waiting for
connection with user account on cloud
Blue: connection with online account active
It is a frost protection mode, the panel maintains
the temperature of 7°C in the room. The pre-set
temperature value cannot be adjusted / modi-
fied.
Switching the panel on/off has a sound signal
Two short tones when ON
One long tone when OFF
Wifi LED starts flashing red and blue alternate-
ly, after releasing the button it starts flashing
only blue - local mode has been started
All LEDs will flash with alternating colours
Note: After the reset, the corresponding panel
has to be removed also from the mobile applica-
tion and new pairing (as during the first start) has
to be done
Default value:
Adjustable value
Every day can have 8 temperature changes
Each temperature change can be assigned any
value ranging 5-35°C (0.5°C step
The program can be created separately for
each individual day, for a block of days/
weekends (5+2 days), or for the whole week (7
days)
Created programs can be copied to other pan-
els in the application