Danfoss TechCase iC7 Operating Manual page 5

Operating Guide | TechCase iC7
Introduction
1
Purpose of this Operating Guide
1.1
This operating guide provides information for safe installation and commissioning of the product. It is intended for use by qualified
personnel. To use the drive safely and professionally, read and follow the instructions. Pay particular attention to the safety instructions
and general warnings.
Version History
1.2
This guide is regularly reviewed and updated. All suggestions for improvement are welcome.
Find the latest version of this guide at https://www.danfoss.com.
The original language of this guide is English.
Table 1: Version History
Version
A
B
Additional Resources
1.3
Other resources are available to understand advanced functions and operation of the product.
iC7 Series Frequency Converters Installation Safety Guide
l
iC7-Automation Frequency Converters Design Guide
l
iC7 Series Industry Application Guide
l
Supplementary publications and manuals are available at https://www.danfoss.com/en/service-and-support/documentation/.
Abbreviations
1.4
Table 2: Abbreviations, Acronyms, and Symbols
Term
AC
DC
EMC
I/O
PE
RCD
Recommended Disposal
1.5
When the product reaches the end of its service life, its primary components can be recycled.
Danfoss Drives Oy © 2024.09
Remarks
The 1st version of this guide.
Updated the guide to match the updated version of the TechCase iC7.
Definition
Alternating current
Direct current
Electromagnetic compatibility
Input/output
Protective earth
Residual-current device
Introduction
AQ433140445569en-000201 / 172K0364B | 5