Advertisement
Quick Links
TT Series Spare Part Kit
CABLE, SOFTSTART AC-DC
100381-1 & 100381-2.
Installation and servicing of Danfoss Turbocor® compressors by qualified and product trained personnel only.
Follow these instructions and sound refrigeration/electrical/servicing practices relating to installation,
commissioning, maintenance, and service.
Consult the appropriate
Danfoss LLC Service Manual
on www.turbocoroem.com
for detailed service
instructions.
1 - Introduction
CABLE, SOFTSTART AC-DC replacement.
This kit contains the Soft Start AC-DC Cable.
Please refer to our Service Manual for the replacement instructions.
We have made the TT Series Service Manual available to anyone. To access the manual, you may scan the applicable QR
code below or you may go to our DTC website at www.turbocoroem.com. At the bottom of the page there is a Section
named "Categories" that includes various menus including one for Manuals.
Refer to the applicable QR code below to download the TT Series Service Manual.
Page 1 of 4
Never power compressor
without covers in place and
secured.
Removing the mains input
cover will expose you to a
voltage hazard of up to
853VDC. Ensure the mains
input power is off and locked
out before removing cover.
Before removing top cover,
wait at least 20 minutes after
isolating AC power to allow
the high voltage capacitors to
discharge.
English
Document number: 701096 REV B
Classified as Business
ENGINEERING
TOMORROW
Always wear appropriately
rated safety equipment when
working around equipment
and/or components
energized with high voltage.
This equipment contains
hazardous voltages that
can cause serious injury or
death.
Chinese
© Copyright Danfoss | 2023.09
Recover all refrigerant
from compressor in
accordance with local
codes and ensure pressure
is fully vented before the
removal of refrigerant
containing components.
Advertisement
Related Manuals for Danfoss TT Series
Summary of Contents for Danfoss TT Series
- Page 1 Please refer to our Service Manual for the replacement instructions. We have made the TT Series Service Manual available to anyone. To access the manual, you may scan the applicable QR code below or you may go to our DTC website at www.turbocoroem.com. At the bottom of the page there is a Section named “Categories”...
- Page 2 • • • DANGER! • • • • This equipment contains hazardous voltages that can cause serious injury or death. Only qualified and trained personnel should work on Danfoss LLC equipment. • Always wear appropriately-rated safety equipment when working around equipment and/or components energized with high voltage.
- Page 3 Isolate compressor power as described in the Electrical Isolation section above prior to performing any service procedures. Please refer to our Service Manual for the replacement instructions. Page 3 of 4 Document number: 701096 REV B © Copyright Danfoss | 2023.09 Classified as Business...
- Page 4 Electrical Isolation section. Danfoss LLC can accept no responsibility for possible errors in catalogues, brochures, and other printed material. Danfoss LLC reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
Need help?
Do you have a question about the TT Series and is the answer not in the manual?
Questions and answers