Tektronix 2714 User Manual page 303

«= Time (hour and minute) when the first measurement will start
= Set REPEAT INTERVAL to 6 HRS (UDP will repeat after every
six hours)
= Set RUN N TIMES to 5 (the number of times you want the
UDP to repeat over a 24-hour period)
[USER DEF] [6] and selecting a storage location. For this exer-
cise, assume that no UDP has already been stored in Slot 3. Store
the routine in Slot 3. You cannot store a routine in a location in
which another is already stored. You must first delete the prior
12. To prevent your routine from accidental erasure, press [USER
DEF] [9] and select item 8, PROTECT, and then press [3]. Select
item 7, DELETE, and notice the # next to your routine indicating
that it is protected. Press [3] [W]. The message:
REMOTE PROTECTION FIRST
appears. To remove the protection, press [BKSP] [8] [3]. You can
now delete the routine if you wish.
13. To execute the UDP press [USER DEF] [3]. The display will
return to the spectral display and also display the message:
PRESS USER DEF TO ABORT
NOTE
In creating the UDP. you actually stored data from each
measurement as the UDP was being defined. If you want