Tektronix 2714 User Manual page 201

CATV Measurements
Turn off the carrier and press [W] to continue (or [2] to abort) the
measurement.
The instrument measures the Cross Modulation and displays the
result.
Press [CATV/APPL] to display the CROSS MODULATION menu.
Press [1] to store the results of the last measurement. After a short
period of time, the message RESULTS STORAGE COMPLETE is
displayed.
Press [2] to display results of the last measurement performed. You
can either view other previously stored results for this measurement by
pressing [W], or stop viewing the results by pressing [Z].
Press [3] to print the results of the last measurement performed. A
printer must be connected to the 2714.
NOTE
You can print measurement results only when the RS-232
interface is installed in the 2714. The GPIB interface does
not support the print function.
Be sure to select handshaking ([UTIL] [4] [0] [2] [5]) to
match that expected by the printer or long jobs may not
print completely.
Press [4] to print the last stored results of the measurement. A printer
must be connected to the 2714.
Press [9] to leave the Cross Modulation measurement and return to
the CATV MEASUREMENTS menu.
6-42 CATV Measurements