Table of Contents
Advertisement
Quick Links
USE AND CARE GUIDE
4-PACK MULTI-COLOR SELECTABLE
TAPE LIGHTS WITH REMOTE
OFF
ON
R
G
B
WW
Flash
Strobe
Fade
Smooth
Questions, problems, missing parts? Before returning to the store,
We appreciate the trust and con dence you have placed in Commercial Electric through the purchase of this LED strip kit.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full inventory
of products available for your home improvement needs. Thank you for choosing Commercial Electric!
call Commercial Electric Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday,
9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
THANK YOU
SKU #0000 000 000
Model #TAPE12RGB3KHD/4
+12V
R
G
B
W
+12V
R
G
B
W
Advertisement
Table of Contents
Related Manuals for Commercial Electric TAPE12RGB3KHD/4
Summary of Contents for Commercial Electric TAPE12RGB3KHD/4
- Page 1 THANK YOU We appreciate the trust and con dence you have placed in Commercial Electric through the purchase of this LED strip kit. We strive to continually create quality products designed to enhance your home. Visit us online to see our full inventory...
-
Page 2: Table Of Contents
TAPE12RGB3KHD/4 to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. -
Page 3: Pre-Installation
Pre-Installation TOOLS REQUIRED (NOT INCLUDED) NOTE: Hardware not shown to actual size. NOTE: Personal injury and damage to the LED strip and/or mounting surface Phillips Measuring may result if the LED strip is pulled from the surface. To reduce the likelihood Screwdriver Tape of injury or damage, mount only on a surface that is structurally sound. -
Page 4: Installation
Installation How to use included connectors □ The wire lead connectors (EE) are used to join two sections of LED tape. □ Insert the pins of the tape light into the corresponding slots of the connector wire. □ Repeat the process by inserting the pins into the connector wire at the opposite end of the tape light. □... -
Page 5: Installing The Infrared Receiver
Installation (continued) Installing the LED strip Tape method: □ Working from one end to the other, remove the adhesive paper backing and press into place. Press between the LEDs to help ensure secure contact with the mounting surface. Avoid pressing on the individual LEDs as this could damage the LED solder connections. -
Page 6: Connecting To The Power Supply
Installation (continued) Connecting to the power supply □ Plug the adapter into the wall receptacle and then use the remote to turn the LEDs on. Connect adapter to power outlet Connect the adapter plug to infrared receiver controller Infrared receiver controller Adapter with plug LED strip light Infrared receiver... -
Page 7: Care & Cleaning
Care and Cleaning □ To clean the fixture, disconnect the power by unplugging the adapter. Use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture. □ Do not use any cleaners with chemicals, harsh abrasives, or solvents. Use only a dry soft cloth to dust or wipe carefully. Troubleshooting Problem Possible Cause... - Page 8 Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
Need help?
Do you have a question about the TAPE12RGB3KHD/4 and is the answer not in the manual?
Questions and answers