Table of Contents
Advertisement
Quick Links
SKU #1012362055
Model #TAPE192/3K/HD
USE AND CARE GUIDE
16FT LED TAPE LIGHT FOR USE WITH
IN-WALL DIMMERS
Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday,
9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
THANK YOU
We appreciate the trust and con dence you have placed in Commercial Electric through the purchase of this product.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full inventory
of products available for your home improvement needs. Thank you for choosing Commercial Electric!
Advertisement
Table of Contents
Related Manuals for Commercial Electric TAPE192/3K/HD
Summary of Contents for Commercial Electric TAPE192/3K/HD
- Page 1 THANK YOU We appreciate the trust and con dence you have placed in Commercial Electric through the purchase of this product. We strive to continually create quality products designed to enhance your home. Visit us online to see our full inventory...
-
Page 2: Table Of Contents
Reorient or relocate the receiving antenna. Increase TAPE192/3K/HD the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -
Page 3: Pre-Installation
Pre-Installation TOOLS REQUIRED (NOT INCLUDED) Measuring Scissors Tape HARDWARE INCLUDED NOTE: Hardware not shown to actual size. Part Description Quantity Plug-in power adapter 16 feet LED flexible strip Wire lead connector (optional use) Wire support clips HOMEDEPOT.COM Please contact 1-877-527-0313 for further assistance. -
Page 4: Installation
□ Use the wire lead connectors (CC) to make turns and go around corners. Additionally, they can also be extended for gaps of any size with 2-pin Commercial Electric Accessory Kits (not Included). – NOTE: Be sure all 24 V connections are secure and protected from electrical shorting. - Page 5 Installation (continued) Soldering the Led tape (optional) □ Soldering is another method for joining wires to the tape light and joining sections of tape light directly together. LED tape Wire LED tape Electric iron Electric iron Wire Lead Connection Splice Connection WARNING: Soldering tape lights to wire should only be performed by individuals with proper knowledge and experience in soldering.
- Page 6 Installation (continued) Installing the power supply IMPORTANT: Do not power the LED tape □ Connect the Plug-in power adapter to an AC live outlet. while on the reel, as the LEDs will overheat. □ If connected to a switched outlet, be sure the power is switched ON for proper remote operation.
-
Page 7: Care & Cleaning
Care and Cleaning □ To clean the light, use a clean dry or slightly damp cloth. □ Do not use cleaners with chemicals, solvents or harsh abrasives as damage to the light strip may occur. Troubleshooting Problem Possible Cause Solution The power adapter Make sure the plug is fully inserted into a live 120 V outlet. - Page 8 Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
Need help?
Do you have a question about the TAPE192/3K/HD and is the answer not in the manual?
Questions and answers