Commercial Electric WHQ20-40 - Led Portable Task Light Manual

Table of Contents

Contents

1 Pre-operation
2 PACKAGE CONTENTS
3 Operation
4 Care and Cleaning
5 Troubleshooting
6 Documents / Resources
- 6.1 Download manual

Pre-operation

Lumens, Runtime [test under 77°F (25°C)], and Charging Time

Model WHQ20-40
Mode	High	Mid	Low	Strobe	SOS	Charging
Lumens	360 Lm	180 Lm	38 Lm	N/A	N/A	N/A
Runtimes (hours)	3.5-4.5	7-8	32-33	12-13	14-15	5-6

PACKAGE CONTENTS

Part	LED Portable Task Light	Quantity
A	Handheld tube	1
B	Adhesive Backed Mounting Strips	2
C	Micro USB Charging Cable	1

Operation

Charging the LED portable task light

INDICATOR LIGHT STATUS

Indicator Status

Red Charging

Green Fully Charged

Orange Low Battery
- The low power orange indicator light illuminates when the battery is less than 10% charged.
- Connect the micro USB charging cable (C) to the micro USB charger port on LED portable task light using an appropriate DC5V 1A charger.
- The recharging status indicator light is red during charging.
- LED portable task light turns green when fully charged.
Turning on the LED portable task light
- Press the power button to turn on the LED portable task light in high mode.
Changing the LED portable task light modes
- Press the power button once to turn the LED portable task light to high mode, twice for medium mode, and three times for low mode.
- Press and hold the power button for 2 seconds to turn on the strobe and hold 2 more seconds to start the SOS mode. These functions are available in all brightness modes.
- Press the power button once to return to high mode when using the strobe or SOS functions.

Positioning the LED portable task light

Position	Description
1	Stand upright.
2	Stick onto adsorption platform using the embedded magnets and adhesive backed mounting strips (B).
3	Hang on the wall using a suspension string (not included).
4	Move freely in any hand-held position.

Positioning the LED portable task light using adhesive backed mounting strips
- Put the white, non-sticky side of the adhesive backed mounting strip (B) onto one end of the LED portable task light. The white, non-sticky side of the adhesive backed mounting strip (B) will automatically stick to the magnet at the end of the LED portable task light.
- Repeat for the second adhesive backed mounting strip (B), placing it on the other end of the LED portable task light.
- Clean the flat surface of the adsorption platform.
- Peel off the bottom side of the adhesive backed mounting strips (B) and press the LED portable task light onto the adsorption platform.
- Refer to Steps 1-3 to operate the LED portable task light.
Removing the LED portable task light from the adhesive backed mounting strips
- Press on the adhesive backed mounting strips (B) stick to the adsorption platform tightly.
- Remove the LED portable task light from the adsorption platform as desired, leaving the adhesive backed mounting strips (B) attached to the adsorption platform for future use.

Care and Cleaning

Wipe the LED portable task light with a piece of white tissue or soft cloth when dirty.
Avoid spraying water on the LED portable task light and the micro USB charging port.

Troubleshooting

Problem	Possible Cause	Solution
The body of the LED portable task light has some small and light scratches.	LED portable task light body is made with oxidized aluminum and like any normal aluminum tube, small scratches may be found.	Handle the LED portable task light body with care.
There are cracks in the magnet	LED portable task light may have been dropped.	Protect the end cap when using and handling the LED portable task light.
LED portable task light does not switch on	The battery level is low.	Check the low battery indication light, if the indicator light is on, charge the LED portable task light.
LED portable task light is becoming dimmer than normal standard.	The battery level is low.
The recharging time is longer than the normal charging hours described in this manual.	The charger is incorrect.	Check whether the charger is DC5V 1A. If the charger is lower than 1A, it is normal for the charging time to be longer.
	The micro USB charging cable cannot accept 1A current.	Check the micro USB charging cable for 1A current capability. If the cable cannot handle 1A current, replace with a different cable with that capacity.
LED portable task light becomes hot	LED portable task light is operating outside of the normal temperature range.	If the temperature of the body is higher than 140°F (60°C) under normal working conditions, return the LED portable task light for a replacement if it is still within the warranty period.
LED portable task light does not work under very cold conditions.	The battery is cold.	Warm the LED portable task light to above 32°F (0°C).
LED portable task light requires more charging time and has a shorter runtime after a period of usage.	The battery life is depleted.	LED portable task light will function at 70% capacity with longer charging times and shorter runtimes. If this interferes with the performance you need for the LED portable task light, purchase a new light.
The adhesive backed mounting strips do not adhere to a surface.	The adhesive backed mounting strips are worn out.	If the adhesive backed mounting strips are older than 6 months, even if never used, purchase another set of adhesive strips. Adhesive backed mounting strips are available for order at www.homedepot.com.
The indicator light flashes during the charging process.	The micro USB charging cable is loose.	Tighten the micro USB charging cable or replace with a new one.
	The indicator light is out of order.	If the LED portable task light is within the warranty period, return the LED portable task light for a replacement.
The adhesive backed mounting strips are difficult to remove.	The glue on the adhesive backed mounting strips is very strong.	Use a thinner to dissolve the glue.
The surface is scratched after removal of the adhesive backed mounting strips.	The glue on the adhesive backed mounting strips is very strong.	Do not apply the adhesive backed mounting strips to surfaces that can be scratched.