Table of Contents
Advertisement
Menu option
Create New Array Three panels open:
•
Array Options menu (appears in the secondary panel when an array is highlighted in the Logical
Configuration View panel)
Menu option
Expand Array
Assign Spare
Remove Spare
Delete Entire Array The data and all the logical drive structures on the array
•
Logical Drive Options menu (appears in the secondary panel when a logical drive is highlighted in the
Logical Configuration View panel)
Menu option
Delete
Drive Settings
SSP Settings*
*This menu option is available only with the MSA1000 and MSA1500.
Typical manual configuration procedures
This section describes the procedures for the following common tasks:
•
Creating a new array and logical drive (on page 18)
•
Adding spare drives (on page 18)
•
Setting the rebuild priority or expand priority (on page 19)
•
Setting the accelerator ratio (on page 19)
•
Expanding an array (on page 20)
•
Migrating RAID level or stripe size (on page 20)
Result of selecting the option
•
Create Array (displays a menu with the following
options: Assign Drive, Assign Spare, Remove Drive,
and Accept Changes)
•
Physical Drives (lists the spare drives and unassigned
physical drives that are connected to the controller)
•
New Array (shows the updated physical configuration
view)
Result of selecting the option
Three panels open:
•
Expand Array (displays a menu with the following
options: Assign Drive, Remove Spare, and Accept
Changes)
•
Physical Drives (lists the spare drives and unassigned
physical drives that are connected to the controller)
•
Expand Existing Array (shows the updated physical
configuration view)
A new panel opens, displaying a menu of the valid drives.
A new panel opens, displaying the spares.
are deleted.
Result of selecting the option
The data and the logical drive structure on the array are
deleted.
A new panel opens, displaying settings for two options:
Fault Tolerance and Stripe Size.
A new panel opens, displaying the Enable or Disable
option.
HP Online Array Configuration Utility for NetWare 17
Advertisement
Table of Contents
