Table of Contents
Advertisement
For more information about reports and viewing them in a browser, see the following sections:
•
"Reported information (on page 99)"
•
"Identifying and viewing diagnostic report files (on page 106)"
•
"Identifying and viewing SmartSSD Wear Gauge report files (on page 108)"
Wizards
From the Wizards screen, you can perform tasks related to controllers, arrays, physical drives, and logical
drives.
For certain tasks, the controller must have SAAP activated by a registered license key. For more information,
see "About SAAP (on page 8)."
When a controller is selected, the wizards that appear are a subset of the total number of wizards that are
possible for the selected controller. ACU lists or omits wizards based on the controller model and
configuration. For example, if the selected controller has no unassigned physical drives, Expand Array is not
an available wizard.
Wizards are available by selecting the root controller in the Systems and Devices tree. The following list
includes all possible wizards:
•
Add Logical Drive
•
Controller Settings
•
Expand Array
•
Express Configuration
•
Manage Spare Drive
•
Migrate Logical Drive
•
Move Array
•
Remove Logical Drive
For more information, see "Using Wizards (on page 50)."
The Express Configuration wizard operates differently. See "Using Express Configuration (on page 52)."
Using Wizards
Open ACU.
1.
For more information, see "Using the ACU GUI (on page 31)."
If ACU is already open, click the Wizards tab.
Select a controller from the Controller/Device menu.
2.
HP Array Configuration Utility 50
Advertisement
Table of Contents
