Powercom SNT-1000 User Manual page 26

T hese products have been tested and thereby comply with the condition of a
C lass C1 (1000VA and 1500VA) and Class C2 (2000VA and 3000VA), which has
b een established for offering sufficient protection against dangerous
i nterference for installation in a residential area. Installation and use of the
e quipment should comply with the instructions provided in order to avoid such
i nterference due to the amount of radio frequency energy that is radiated and
g enerated by the equipment. In spite of this, we cannot assure that a certain
a mount of interference may not occur in some installations.
If, by turning on and off, it can be deduced that your radio or television
reception is found to be influenced by harmful interference from the equipment,
it is recommended to use one of the following preventive measures:
．Place the receiving antenna in a separate location or orientation.
． Ensure a greater distance is achieved between the receiver and the
equipment.
．Ensure that your equipment is connected to an outlet on a separate circuit
than the receiver.
． Contact a technician experienced with radio and TV or a dealer for
further assistance.
Declaration of Conformity Request
Units labeled with a CE mark comply with the following standards and
instructions:
．Safety: EN 62040-1
．EMC: EN 62040-2
．EMC Directive: 2014 / 30 / EU
．LVD Directive: 2014 / 35 / EU
The EC Declaration of Conformity is available upon request for products
with CE mark.
© All rights reserved. All trademarks are property of their respective owners.
https://tm.by
Интернет-магазин
E MC Statement
1