▪ Reduced mode: rooms will follow the set point that
has been set for reduced mode
▪ Standby: Rooms will not follow any set point. Only
frost protection is active and rooms will be heated,
once their temperature drop below 5 °C by default -
adjustable during commissioning.
▪ Vacation: Rooms will follow the set point that has
been given for vacation.
▪ Party: Room will follow the set point for normal
mode for the time choosen for party mode.
Fig. 07-8
App: Energy level
07.04.04
Operating Mode
The operating mode is valid for the complete
NEA SMART 2.0 installation. There are five different
choices:
▪ Auto: NEA SMART 2.0 changes automatically
between heating, cooling or neutral operating mode
depending on outside conditions, rooms conditions
and heating / cooling periods (if defined).
▪ Heating: NEA SMART 2.0 will heat only, depending
on the room conditions, outside conditions and
heating period (if defined).
▪ Manual Heating: NEA SMART 2.0 will heat depen-
ding on the room conditions, regardless of any
heating period or outside condition.
▪ Cooling: NEA SMART 2.0 will cool only, depending
on the room conditions, outside conditons and
cooling period (if defined).
▪ Manual Cooling: NEA SMART 2.0 will cool depen-
ding on the room conditions, regardless of the
cooling period and outside condition.
Auto Mode and Cooling / Cooling Manual is only avail-
able if your NEA SMART 2.0 system is configured for
cooling. The heating and cooling modes can also be
enabled or disabled depending on the control signals
applied to the system.
Fig. 07-9
App: Operating mode
07.04.05
Set points for temperature in timed
mode
For each room, there can be a set point defined for
normal mode and reduced mode. To change these set
points, choose the individual room in the start screen,
push the three dots on the upper right part of the
screen and choose "Settings" and then "Set points
Room Temperature". In this screen, the set points can
be adjusted.
Fig. 07-10
App: Set points for temperature in timed mode
07.04.06
Advanced Menu
A tap on the 3 dots near the room name opens the
menu with the contents
▪ Settings
▪ General
▪ Set points room temperature
▪ Open window detection
▪ Timing programs
▪ Activate Party Mode (party mode 2 hrs, 4 hrs, until
manual deactivation)
▪ Lock Room Unit
Fig. 07-11
App: Advanced menu
41
Need help?
Do you have a question about the NEA SMART 2.0 and is the answer not in the manual?