Rehau NEA SMART 2.0 End User Manual page 3

01 Information and safety instructions
Product conformity and safety
Product conformity
Hereby, REHAU Industries SE & Co. KG declares that
the radio equipment type NEA SMART 2.0 Base 230 V
and NEA SMART 2.0 Base 24 V is in compliance with
EU directive 2014/53/EU and UK regulation UK: 2017
No. 1206.
Frequency: 869 MHz
Transmission power: max. +12 dBm
The full text of the EU and UK declaration of
conformity is available at the following internet
address: www.rehau.com/neasmart2
Safety information
Intended use
The NEA SMART 2.0 control system may only be
planned, installed and operated as described in these
instructions and in the other documents belonging to
this system. Any other use is not intended and there-
fore inadmissible.
Observe all national and international installation,
accident prevention and safety regulations when
installing piping systems and electrical equipment as
well as observe the information in this manual.
Areas of application that are not covered in these
instructions (special applications) require consultation
with our application technology department.
Contact your REHAU sales office.
Our systems have to be installed by authorized and
trained persons, and work on electrical systems or
parts of cables only by trained and authorized persons.
Pictograms and logos
Warnings and general information are marked with the
symbols listed below.
Danger to life due to high voltage
Safety information
Legal information
Important information
which must be observed
Information on the Internet
Your benefits
Authorised personnel
The electrical installation must comply with the appli-
cable national regulations and the regulations of the
local power supplier.
This manual requires special knowledge corresponding
to an officially recognised qualification in one of the
following professions:
▪ Electrical or electronics engineer
In accordance with the international regulations as
well as the comparable professions within your
specific national legal framework.
Cleaning
Only use a dry, solvent-free, soft cloth for cleaning.
Disposal
The batteries and all components of the NEA SMART 2.0
system must not be disposed with domestic waste.
The user has the duty to dispose of the devices at
designated collection points. The separate collection
and orderly disposal of all materials will help to
conserve natural resources and ensure recycling in a
manner that protects human health and the environ-
ment. If you need information about collection points
for your devices, please contact your local council or
your local waste disposal services.
Parameter setting – Expert
The control unit is equipped with different parameters.
These parameters can be easily changed for your
specific application.
Please note that the parameter areas may only be
operated by an installer or a qualified person.
Changing the parameters can have serious conse-
quences for the heating and / or cooling systems.
Please enter all parameter changes in the "installer's
notes" section.
03