Rehau NEA SMART 2.0 End User Manual page 15

03.04 Operating procedure (Fan Coils, Operation Mode, Energy Level)
Initial state
1
2
Display of current room temperature and setpoint
2
▪ To display the setpoint (desired temperature), press + or – once. Each additional keystroke to + or – increases or decreases
the setpoint
3
Display of current humidity for room units with humidity measurement
3
4a 4b 5
Room with switched fan coil
4a
▪ By pressing + or – the switched fan coil is manually started (ON) or stopped (OFF)
1) Note:
▪ The available selection options depend on the system configuration, the conditions (room temperature setpoints, actual values, ...) and the system
settings.
▪ The current setting is always displayed first
Depending on the configuration, different display options appear after pressing the
HOME button:
Room with switched fan coil
4a
Room with modulating RAUCLIMATE SILENT BREEZE fan coils also in combination
4b
with one switched fan coil
Room without fan coil
5
5
1)
15