Controller Card; Raid Battery (Optional); Installing The Raid Battery - Dell PowerEdge E05S Owner's Manual

Figure 3-20. Removing and Installing the RAID Battery
5
1 RAID battery carrier
3 RAID battery cable
5 cooling shroud

Installing the RAID Battery

1 Insert the RAID battery into the battery carrier in the cooling shroud.
See Figure 3-20.
2 Route the RAID battery cable along the chassis wall and through the slot
in the battery carrier.
3 Tuck any cable slack into the area in front of the battery carrier slot.
4 Connect the battery cable to the connector on the integrated storage

controller card.

5 Replace the cooling fan assembly. See "Installing the Cooling Fan
Assembly" on page 104.
6 Close the system. See "Closing the System" on page 77.
7 Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
1
2
4
Installing System Components
2
RAID battery
RAID battery carrier slot
3
4
119