Processor Settings Screen - Dell PowerEdge E05S Owner's Manual

Processor Settings Screen

Option
64-bit
Core Speed
Bus Speed
Hyper Transport
Technology (HT3 default)
HT Assist (Enabled
default)
CPU Virtualization
Technology
(Enabled default)
DRAM Prefetcher
(Enabled default)
Hardware Prefetch
Training on Software
Prefetch
Hardware Prefetcher
(Enabled default)
Execute Disable
(Enabled default)
Number of Cores per
Processor (All default)
C1E
(Disabled default)
Processor X Family-
Model-Stepping
58
Using the System Setup Program and UEFI Boot Manager
Description
Specifies if the processor(s) support 64-bit extensions.
Displays the processor clock speed.
Displays the processor bus speed.
Displays the HyperTransport link speed, and depending
upon the system, this field may be read-only. HT3
capable systems ship with HT3 by default.
Enables or disables the HT Assist.
Enabled permits virtualization software to use the
virtualization technology incorporated in the processor.
NOTE:
Disable this feature if your system does not run
virtualization software.
Enables or disables the DRAM prefetcher.
Enables or disables the Hardware prefetcher training on
software prefetcher.
Enables or disables the hardware prefetcher.
Enables or disables Execute Disable Memory Protection
Technology.
Controls the number of enabled cores in each processor.
When set to Enabled, the processor(s) can switch to a
minimum performance state when idle.
Displays the family and model number of each processor.
A submenu displays the core speed, the amount of cache
memory, and the number of cores of the processor(s).