Jumpers and Connectors
System Board Jumper
For information on disabling a password, see "Disabling a Forgotten Password"
on page 183.
Table 6-1. System Board Jumper Settings
Jumper
Setting
PWRD_EN
NVRAM_CLR
Description
(default)
The password feature is enabled
The password feature is disabled, and iDRAC6
local access is unlocked at the next AC power
(pins 4-6)
cycle
(default)
The configuration settings are retained at system
boot (pins 3-5)
The configuration settings are cleared at the next
system boot (pins 1-3)
Jumpers and Connectors
(pins 2-4)
175