Dell PowerEdge E05S Owner's Manual page 165

5 Ensure that each expansion card is firmly seated in its connector.
See "Installing an Expansion Card" on page 109.
6 Close the system. See "Closing the System" on page 77.
7 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
8 If the problem is not resolved, turn off the system and attached
peripherals, and disconnect the system from the electrical outlet.
9 Open the system. See "Opening the System" on page 76.
10 Remove all expansion cards installed in the system. See "Removing an
Expansion Card" on page 111.
11 Close the system. See "Closing the System" on page 77.
12 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
13 Run the appropriate online diagnostic test.
If the tests fail, see "Getting Help" on page 185.
14 For each expansion card you removed in step 10, perform the following
steps:
Turn off the system and attached peripherals, and disconnect the
a
system from the electrical outlet.
Open the system. See "Opening the System" on page 76.
b
Reinstall one of the expansion cards.
c
Close the system. See "Closing the System" on page 77.
d
Run the appropriate diagnostic test.
e
If the tests fail, see "Getting Help" on page 185.
Troubleshooting Your System
167