Download Print this page

Front Runner Slimpro KVCAUNI Manual

Canopy rack

Advertisement

Quick Links

front runner
START HERE!
Don't be a hero and muscle through this installation without reading these fitting instructions first! Improper installation of this gear may void certain
aspects of your warranty.
Before you begin, take a moment and open all your Front Runner rack kit boxes and gather the assembly instructions for the various components.
A complete kit will contain:
1. A Front Runner Mounting System specific to your vehicle
2. A Front Runner Rack Tray or Load Bar Slats
This document will guide you through the assembly of the mounting system and assist you in fitting the roof rack tray or load bars to your specific
vehicle.
Please refer to the next page for a list of all the components, quantities and tools required.
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
KVCAUNI_REV_A00
Slimpro Canopy Rack
READ ME FIRST
IMPORTANT WARNING!
Please call us if you have any questions about the installation of this product.
1
KVCAUNI
© 2024 FRONT RUNNER VEHICLE OUTFITTERS
ENG

Advertisement

loading
Need help?

Need help?

Do you have a question about the Slimpro KVCAUNI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Front Runner Slimpro KVCAUNI

  • Page 1 Don’t be a hero and muscle through this installation without reading these fitting instructions first! Improper installation of this gear may void certain aspects of your warranty. Before you begin, take a moment and open all your Front Runner rack kit boxes and gather the assembly instructions for the various components. A complete kit will contain: 1.
  • Page 2 Narrow Slat End Piece 13mm Foot Pairs Bolt Kit For fitment onto canopies without tracks, follow instructions starting on page 3. For fitment onto canopies with tracks, follow instructions starting on page 4. KVCAUNI_REV_A00 © 2024 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 3 fitment. Use a 4mm drill bit to drill the pilot holes and open up to a 9mm hole using a 9mm drill bit. KVCAUNI_REV_A00 © 2024 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 4 Using a Tape Measure Center the side profile to the feet and fully tighten the M8 x 16 Button Head bolts. Tightening Torque: M8 : 15-20Nm / 11.06 ft lb - 14.75 ft lb KVCAUNI_REV_A00 © 2024 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 5 Nut Caps over all the M8 Nyloc Nuts. Tightening Torque: M8 : 15-20Nm / 11.06 ft lb - 14.75 ft lb After all fasteners are fully tightened fit the end cap to the slats as shown. © 2024 FRONT RUNNER VEHICLE OUTFITTERS KVCAUNI_REV_A00...
  • Page 6 IMPORTANT! FRONT RUNNER RACK KITS OFTEN HAVE A HIGHER LOAD RATING THAN THE VEHICLES THEY ARE MOUNTED TO. PLEASE REFER TO YOUR SPECIFIC VEHICLE MANUFACTURER FOR A RECOMMENDED ROOF RATING. FRONT RUNNER CANNOT BE RESPONSIBLE FOR IMPROPER LOADING BEYOND THE VEHICLE MANUFACTURER'S STATED LOAD CAPACITY.

This manual is also suitable for:

Slimpro kvca001tSlimpro kvca002tSlimpro kvca004tSlimpro kvca003tSlimpro kvca005t