Labconco Protector 3930000 User Manual page 5

Chapter 1:
Introduction
Congratulations on your purchase of a Labconco Protector® Work Station.
Your enclosure provides personnel protection through superior
containment while conserving energy at OSHA approved velocities as low
as 60 feet per minute. It is the result of Labconco's more than 50 years of
experience in manufacturing fume hoods and more than 30 years of
experience in manufacturing filtered enclosures.
These enclosures will effectively contain toxic or noxious fumes and
chemicals when properly installed and operated. Each enclosure uses
either a carbon filter for exhausting low concentrations to the room or an
accessory remote blower or accessory FilterMate Portable Exhauster for
exhausting high concentrations to the outside. The carbon filters are
available with three different carbons for adsorbing organic vapors,
formaldehyde or ammonia and amines. The accessory FilterMate
Portable Exhauster can also filter particulates. The Protector Work
Stations offer many unique features to enhance safety, performance, and
energy savings. To take full advantage of them, please acquaint yourself
with this manual and keep it handy for future reference. If you are
unfamiliar with how high performance Protector Work Stations operate,
please review Chapter 4: High Performance Features and Safety
Precautions before you begin working in the enclosure. Even if you are an
experienced user, please review Chapter 5: Using Your Protector Work
Station, which describes the features so that you can use the enclosure
efficiently. See chart that follows for application review and contact
Labconco for additional ordering information.
! If the unit is not operated as specified in this manual it
may impair the protection provided by the unit.
Si l'unité n'est pas utilisée comme spécifié dans ce
manuel il peut diminuer la protection fournie par l'unité.
Product Service 1-800-522-7658 1