Table of Contents
Advertisement
PROBLEM SOLVER
(continued)
PROBLEM
POSSIBLE
CAUSE
TINY SCRATCHES
- Incorrect cleaning methods have been used. cookware with rough bottoms has
may appear as cracks_ OR
been used. or coarse particles (salt or sand) were between the cookware and the
ABRASIONS
ON RADIANT
surface of cooktop. Use recommended
cleaning procedures, be sure cookware
COOKTOP GLASS SURFACE
bottoms and cookware are clean before use. and use cookware with smooth
bottoms. Tiny scratches are not removable but will become less visible in
time as a result of cleaning.
METAL MARKINGS
° Do not slide aluminum cookware across the surface. Use recommended
may appeal" as scratches on
cleaning procedure to remove marks.
radiant cooktop glass surface_
° Incorrect cleaning materials have been used. encrusted boilovers or grease
spatters remain on the surfhce. Use a razor scraper and recommended
cleaning procedure.
DARK STREAKS OR SPECKS
• Use a razor scraper and recommended
cleaning procedure.
ON RADIANT
MODULE
AREAS OF
° Mineral deposits fl'om water or food can be removed with Cook Top
DISCOLORATION
Cleaning Creme .......
ON RADIANT
SURFACE
COOKTOP
HOT SUGAR MIXTURES
° Turn the surface unit to LO. wipe the hot cooktop with several dry paper towels.
MELTED qD THE
Use a razor scraper held at a 30 ° angle to the cooktop to scrape the hot spill to
RADIANT
SURFACE
a cool area outside the surface unit. Let the cooktop cool. Clean with Cook Top
Cleaning Creme.
FREQUENT
CYCLING
• Incorrect cookware used. Use only fiat cookware to minimize cycling.
OFF AND ON OF RADIANT
SURFACE UNITS
36
Advertisement
Table of Contents
