Problem Solver - GE Monogram ZGU36N4RH3SS Owner's Manual

The Problem Solver
Professional Rongetops
PROBLEM POSSIBLE CAUSE
BURNERS DO NOT
LIGHT OR SPARK
RANDOMLY
BURNERS HAVE
YELLOW OR
YELLOW-TIPPED
FLAMES
BURNER FLAMES
VERY LARGE
OR YELLOW
BURNER CONTROL
KNOB WILL NOT
TURN
• Electrical plug is not plugged into a live power outlet.
• Gas not turned on.
• Burner parts not replaced correctlg.
• Holes in the simmer rings or slits in the burner rings are clogged.
• Clogged orifice, or wet burners or electrodes.
• Burner ports not reploced correctlg,
A. Yellow flames: Call for
service.
B. Yellow tips on outer cones:
Normal for LP gas.
C. Soft blue flames:
Normal for natural gas.
• If burner flames look like (A),coil for service. Normal burner flames
should look like (B) or (C),depending on the tgpe of gas.
• The rongetop mog be connected to the wrong fuel tgpe. Contact the
person who installed gour rongetop or made the conversion.
When the knob is at the OFF position, it must be pushed in before
it con be turned, and it con onlg be turned in o counterclockwise
direction. When the knob is at ong other position, it con be turned
in either direction without being pushed inwards.
18