Table of Contents
Advertisement
Questions?
PROBLEM
Use this
BURNERS DO
NOT LIGHT
problem
solver!
BURNER FLAMES
VERY LARGE
OR YELLOW
TICKING SOUND
OF SPARK IGNITOR
AFTER BURNER
LIGHTS
STRONG ODOR
If you need more help...call, toll free:
GE Answer Center®
800.626.2000
consumer information service
The Problem Solver
POSSIBLE CAUSE
• Burners assembled incorrectly after cleaning. Make sure the burner
assembly is put together correctly and that the port ring is aligned.
• Clean the ignitor orifice.
• Inspect the manual cut-off valve to insure that it is not closed.
• Make sure the electrical plug is plugged into a live power outlet.
• Check for a power outage.
• Improper LP gas connection. See the Installation Instructions.
• The spark ignitor is not deactivated. Turn the burner OFF and
relight. Some ticking is normal. If ticking is excessive call for service.
• Improper air/gas ratio in burners. Adjust the air shutters.
Stainless Steel Cooktop
19
Advertisement
Table of Contents
