Lippert Tire Linc Installation And Owner's Manual

Lippert Tire Linc Installation And Owner's Manual

Tyre pressure & temperature monitoring system
Hide thumbs Also See for Tire Linc:

Advertisement

Table of Contents
Introduction
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Key System Components
Safety
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Parts List
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Resources Required
Repeater Dock Installation
Installation and Setup
Connect OneControl BT App to Repeater
Stem Sensor Pairing Sequence
Use Smart Phone to Pair Sensors to Repeater
Operation
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Tyre Limits Example
Configure All Sensors
Changing Units of Measure
Troubleshooting
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Remove Stem Sensor to Change Battery
Missing Stem Sensor
Factory Reset
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
No Power
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Learn Sensors Procedure Resets System
Notes
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
lippert.com
432-LIPPERT (432-547-7378)
Mobile phone not included
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � �
Tire Linc
Tyre Pressure & Temperature
Monitoring System 2.0
Installation and Owner's Manual
(For Aftermarket Applications)
Tire Linc
Tyre Pressure &
Temperature
Monitoring System 2.0
Installation and Owner's Manual
(For Aftermarket Applications)
PN
PN
2020130644 Tire Linc
2020130643 Tire Linc
2020130630 Tire Linc
2020130627 Tire Linc
2020130645 Tire Linc
Introduction
®
1
Tire Linc
is a tyre pressure and temperature monitoring
1
system (TPMS)� The TPMS issues an alert via the
2
OneControl BT
2
temperature falls out of the programmable range�
3
Key System Components
3
• Sensors - Stem mount, 1295 kPa (188 psi) maximum
4
pressure reading, -50 to 205 °C (-58 to 401 °F)
4
temperature measurement range—Stem Sensor
7
Working Range: 85 to -20 °C (185 to -4 °F)�
8
� � � � � � � �
• Repeater - Receives sensor data, communicates with
10
phone app via Bluetooth Low Energy (BLE)�
11
14
• Repeater Dock - Provides power to repeater, which
15
"docks" to this base�
15
• OneControl BT App - Displays real-time tyre pressures,
15
temperatures and visual alerts for faults�
15
15
NOTE: Images used in this document are for reference
15
only when assembling, installing and/or operating this
15
product� Actual appearance of provided and/or purchased
16
parts and assemblies may differ�
1
AU
®
®
Tire Linc AU Aftermarket Kits
Tire Linc AU Aftermarket Kits
Description
Description
®
AU 4-stem sensor kit with repeater dock
®
AU 4-stem sensor kit without repeater
dock
®
AU 2-stem sensor kit with repeater dock
®
AU 2-stem sensor kit without repeater
dock
®
AU stem sensor 1-pack kit
®
app when a caravan's tyre(s) pressure or
CCD-0004069
AU
Rev: 09.29.21

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tire Linc and is the answer not in the manual?

Questions and answers

MICHAEL HARRISON
February 17, 2025

Good morning team, quick question, can the TPMS be paired to 2 phones? Regards Mick Harrison

Summary of Contents for Lippert Tire Linc

  • Page 1 Tyre Pressure & Temperature Monitoring System 2.0 Installation and Owner’s Manual (For Aftermarket Applications) Mobile phone not included Tire Linc AU Aftermarket Kits Tire Linc AU Aftermarket Kits Description Description ® 2020130644 Tire Linc AU 4-stem sensor kit with repeater dock ®...
  • Page 2: Parts List

    Tire Linc ® Tyre Pressure & Temperature Monitoring System 2.0 Installation and Owner’s Manual (For Aftermarket Applications) Parts List Additional information about this product can be obtained from lci1�com/support or by using the LippertNOW app� App Store for iPhone and iPad and also on Google ®...
  • Page 3: Resources Required

    NOTE: Connecting Tire Linc to a power source past the disconnect will turn off the Tire Linc system if the power source is turned off during transport� NOTE: The Tire Linc repeater dock MUST be mounted vertically�...
  • Page 4: Installation And Setup

    Tire Linc ® Tyre Pressure & Temperature Monitoring System 2.0 Installation and Owner’s Manual (For Aftermarket Applications) Installation and Setup Connect OneControl BT App to Repeater 1. Locate and remove film cover from repeater 1. Download the LCI OneControl BT app for either an iOS dock (Fig.2A)�...
  • Page 5 (For Aftermarket Applications) 4. OneControl BT requires location permission to find and 6. Look for Tire Linc and press the listing� If more than one connect to available networks (Fig.5)� Tap Continue button Tire Linc option appears in the list, select the one with the to proceed with setup�...
  • Page 6 Tire Linc ® Tyre Pressure & Temperature Monitoring System 2.0 Installation and Owner’s Manual (For Aftermarket Applications) 8. Tap the SETUP COACH button (Fig.9A) to continue� 9. Select a vehicle class (Fig.10) then tap CONTINUE� Fig.10 10. Select a vehicle layout (Fig.11) then tap FINISH�...
  • Page 7 Tire Linc ® Tyre Pressure & Temperature Monitoring System 2.0 Installation and Owner’s Manual (For Aftermarket Applications) 11. Finish setup by tapping the arrow to the right of Learn Stem Sensor Pairing Sequence Sensors (Fig.12A)� The pairing sequence for stem sensors (Fig.13) is...
  • Page 8 Tire Linc ® Tyre Pressure & Temperature Monitoring System 2.0 Installation and Owner’s Manual (For Aftermarket Applications) Use Smart Phone to Pair Sensors to Repeater PRESSURE app screen if not having done so already� The app will display a list of tyres with instructions to screw the NOTE: If a wrong caravan type is chosen or there is a new first stem sensor onto the Front Left tyre stem (Fig.16)�...
  • Page 9 TYRE PRESSURE screen� Do NOT tap limit values will be incorrectly estimated� Pressure and the Learn Sensors button again� Doing so resets Tire Linc temperature limits can be set through the app after into configuration mode, which requires uninstalling the learning has been completed�...
  • Page 10: Operation

    Android smart phone do as follows: A. Tap the OneControl BT icon to launch the app� B. The app will automatically detect the Tire Linc system� NOTE: If necessary, follow the online prompts to set up Tire Linc within the OneControl BT app�...
  • Page 11 Tire Linc ® Tyre Pressure & Temperature Monitoring System 2.0 Installation and Owner’s Manual (For Aftermarket Applications) 5. Tap the readout button (Fig.20A) of a tyre to launch its properties window� Within the selected tyre’s properties window, various tyre and sensor specifications can be observed and altered�...
  • Page 12 Tire Linc ® Tyre Pressure & Temperature Monitoring System 2.0 Installation and Owner’s Manual (For Aftermarket Applications) The following example illustrates the interaction between the various tyre settings and how the resulting information is relayed by the monitoring system for display in the app�...
  • Page 13 Tire Linc ® Tyre Pressure & Temperature Monitoring System 2.0 Installation and Owner’s Manual (For Aftermarket Applications) Fig.23 Fig.25 Fig.26 Fig.24 lippert.com 432-LIPPERT (432-547-7378) Rev: 09.29.21 CCD-0004069...
  • Page 14 Tire Linc ® Tyre Pressure & Temperature Monitoring System 2.0 Installation and Owner’s Manual (For Aftermarket Applications) Configure All Sensors As an option to configuring sensors individually, all the sensors can be configured simultaneously� 1. Press the arrow by Configure All Sensors (Fig.27A)�...
  • Page 15: Troubleshooting

    Do NOT tap the Learn Sensors button� Doing so resets is taken apart to utilize, is comprised of two pieces molded Tire Linc into configuration mode, which requires to match the tops and bottoms of the stem sensors� Slightly uninstalling the stem sensors�...
  • Page 16 (For Aftermarket Applications) Notes Manual information may be distributed as a complete document only, unless Lippert Components provides explicit consent to distribute individual parts� All manual information is subject to change without notice� Revised editions will be available for free download at lippert�com�...

This manual is also suitable for:

20201306442020130643202013063020201306272020130645

Table of Contents

Save PDF