Lippert Sway Command 1.5 Owner's Manual
  1. Manuals
  2. Brands
  3. Lippert Manuals
  4. Automobile Accessories
  5. Sway Command 1.5
  6. Owner's manual

Lippert Sway Command 1.5 Owner's Manual

Hide thumbs

Advertisement

Table of Contents

Sway Command
1.5
by trailair
®
(JAYCO)(AU)
OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sway Command 1.5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lippert Sway Command 1.5

Summary of Contents for Lippert Sway Command 1.5

  • Page 1 Sway Command by trailair ® (JAYCO)(AU) OWNER'S MANUAL...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Introduction Causes of Sway Safety Prior to Operation Operation Light Codes and Troubleshooting Introduction The Sway Command® system is a self-contained caravan stability control module that detects undesirable caravan movement from external sensors and mitigates it by adaptively applying a variable braking voltage to the left and right caravan electric brakes.

  • Page 3: Safety

    Safety Read and understand all instructions before installing or operating this product. Adhere to all safety labels. This manual provides general instructions. Many variables can change the circumstances of the instructions, i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This manual cannot begin to plot out instructions for every possibility, but provides the general instructions, as necessary, for effectively interfacing with the device, product or system.

  • Page 4: Prior To Operation

    Prior to Operation Sway Command must be installed properly or it will not operate correctly. • Caravan brakes must be adjusted per OEM specifications to ensure proper caravan braking. The tow operator must make sure caravan brakes are properly adjusted. Sway Command may not operate properly with improperly adjusted brakes.

  • Page 5: Light Codes And Troubleshooting

    Sway Command will “wake up” if it senses external brake activations. During wake up, Sway Command performs self-checks and alternately flashes the light pod lights green and red (Fig. 2). Fig. 2 Note: The tow vehicle brake control module (BCM) applies brakes to the caravan when the tow operator presses on the tow vehicle brake pedal or activates a manual switch on the tow vehicle BCM.
  • Page 6 The contents of this manual are proprietary and copyright protected by Lippert Components, Inc. (LCI). LCI prohibits the copying or dissemination of portions of this manual unless prior written consent from an authorized LCI representative has been provided.  Any unauthorized use shall void any applicable warranty. ...

Table of Contents