LIFE home integration GE UNI 24R DL2 Instructions And Warnings For Installation And Use page 12

4 - CONTROL UNIT SETUP
AVVERTENZA
4.1 - Total reset
1
OFF
F
O F
230V
the red LEDs come on.
4.2 - – Run the initial setup and phase lag
N.B. If only one motor is used, connect it to terminals 35 - 36.
1
Once programming is complete, the two green LEDs flash, while the two red LEDs turn on
with steady light.
Once programming is complete, The START key can be used as a STEP command for 10 minutes.
different phase lags. See chapter N. 10 Page 18.
1
2
OFF
F
O F
230V
2
2
Energy Saving
we have introduced the Energy
ON
O N
from the control unitsetup, the front
panel LEDs turn off and the use of
the keyboard is inhibited. To
230V
the control unit off and on again
3
F
O F
230V
a) Place the leaves at 45°.
sequence:
- close leaf 2;
- close leaf 1;
- open leaf 1;
- close leaf 2.
P.12
ON
O N
230V