Memory Problems; Mouse Problems - Dell XPS DC01L Owner's Manual

book.book Page 68 Tuesday, November 27, 2007 10:29 AM

Memory Problems

CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
I F Y O U R E C E I V E A N I N S U F F I C I E N T M E M O R Y M E S S A G E
• Save and close any open files and exit any open programs you are not using to see if
that resolves the problem.
• See the software documentation for minimum memory requirements. If necessary,
install additional memory (see "Installing Memory" on page 106).
• Reseat the memory modules (see "Memory" on page 104) to ensure that your
computer is successfully communicating with the memory.
• Run the Dell Diagnostics (see "Dell Diagnostics" on page 86).
F Y O U E X P E R I E N C E O T H E R M E M O R Y P R O B L E M S
I
• Reseat the memory modules (see "Memory" on page 104) to ensure that your
computer is successfully communicating with the memory.
• Ensure that you are following the memory installation guidelines (see "Installing
Memory" on page 106).
• Ensure that the memory you are using is supported by your computer. For more
information about the type of memory supported by your computer, see "Memory" on
page 104.
• Run the Dell Diagnostics (see "Dell Diagnostics" on page 86).

Mouse Problems

CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
H E C K T H E M O U S E C A B L E
C
• Ensure that the cable is not damaged or frayed and check cable connectors for bent or
broken pins. Straighten any bent pins.
• Remove any mouse extension cables, and connect the mouse directly to the computer.
• Verify that the mouse cable is connected as shown on the setup diagram for your
computer.
R E S T A R T T H E C O M P U T E R
1
Simultaneously press <Ctrl><Esc> to display the Start menu.
2 press the up- and down-arrow keys
Press <u>,
Off, and then press <Enter>.
68
Troubleshooting
—
—
—
to highlight Shut down or Turn
—