Entering System Setup - Dell XPS DC01L Owner's Manual

book.book Page 179 Tuesday, November 27, 2007 10:29 AM

Entering System Setup

1 Turn on (or restart) your computer.
2 When the DELL logo appears, press <F2> immediately.
NOTE:
for extended periods of time. To avoid possible keyboard failure, press and
release <F2> in even intervals until the system setup screen appears.
If you wait too long and the operating system logo appears, continue to
wait until you see the Microsoft
your computer and try again.
System Setup Screens
The system setup screen displays current or changeable configuration
information for your computer. Information on the screen is divided into
three areas: the options list, the active options field, and key functions.
Options List — This field
appears on the left side of the
system setup window. The field
is a scrollable list containing
features that define the
configuration of your
computer, including installed
hardware, power conservation,
and security features.
Scroll up and down the list
with the up- and down-arrow
keys. As an option is
highlighted, the Options Field
displays more information
about that option and the
option's current and available
settings.
Keyboard failure may result when a key on the keyboard is held down
®
Windows
Options Field — This field appears on
the right side of the system setup window
and contains information about each
option listed in the Options List. In this
field you can view information about
your computer and make changes to your
current settings.
Press the left- and right-arrow keys to
highlight an option. Press <Enter> to
make that selection active and return to
the Options List.
NOTE:
are changeable.
Key Functions — This field appears
below the Options Field and lists keys
and their functions within the active
system setup field.
®
desktop, then shut down
Not all settings listed in the Options Field
Appendix
179