Entering System Setup - Dell Dimension C521 Service Manual

Back to Contents Page
System Setup
Dell™ Dimension™ C521 Service Manual
Overview
Clearing Forgotten Passwords and CMOS Settings
Flashing the BIOS
Overview
Overview
Use system setup as follows:
To change the system configuration information after you add, change, or remove any hardware in your computer
l
To set or change a user-selectable option such as the user password
l
To read the current amount of memory or set the type of hard drive installed
l
Before you use system setup, it is recommended that you write down the system setup screen information for future reference.
NOTICE:
incorrectly.

Entering System Setup

1. Turn on (or restart) your computer.
2. When the blue DELL™ logo is displayed, you must watch for the F2 prompt to appear.
3. Once this F2 prompt appears, press <F2> immediately.
NOTE:
then press <F2>. If you press <F2> before you are prompted, this keystroke will be lost.
4. If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop, then, shut down your
computer (see
System Setup Screen
The system setup screen displays current or changeable configuration information for your computer. Information on the screen is divided into four areas: the
menu at the top, the main window, the Item Help field on the right, and key functions listed on the bottom.
Options List — This field appears on the left side of the system setup window. The field is a
scrollable list containing features that define the configuration of your computer, including
installed hardware, power conservation, and security features.
Scroll up and down the list by using the up- and down- arrow keys. As an option is highlighted,
the Option Field displays more information about that option and the option's current and
available settings.
Great user manuals database on
Unless you are an expert computer user, do not change the settings for this program. Certain changes can make your computer work
The F2 prompt indicates that the keyboard has initialized. This prompt can appear very quickly, so you must watch for it to display, and
Turning Off Your Computer) and try again.
UserManuals.info
Option Field — This field contains information about each
option. In this field you can view your current settings and
make changes to your settings.
Use the right- and left-arrow keys to highlight an option.
Press <Enter> to make that selection active.
Key Functions — This field appears below the Option Field