Changing The Motor Protection Filter - Morphy Richards IB70061 Instructions Manual

Cylinder vacuum cleaner
Table of Contents

Advertisement

9138 PowerChamp ib
Changing the motor
protection filter
The motor protection filter is accessible
from the dust compartment only when the
dust bag has been removed first.
IMPORTANT: Never use the appliance
without the motor protection filter installed,
otherwise damage to the motor may occur
which would not be covered by the
guarantee.
1 Open the flap on the filter holder.
2 Take out the filter and clean (by shaking)
or replace.
3 Close the filter holder.
It is recommended that this filter is
cleaned everytime the dustbag is changed,
and is replaced every 5 dustbag changes.
Changing the
exhaust air filter
The exhaust air filter should be cleaned
by shaking every time the dustbag is
changed. This filter can also be washed in
warm water (no detergents added) and
allowed to dry naturally.
IMPORTANT: The filter must be totally dry
before putting it back into the cleaner.
8
10/12/04
3:16 pm
Page 8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerchamp 70061

Table of Contents