Morphy Richards Ecovac 70096 Rev 2 (Page 1) Instructions Manual
  1. Manuals
  2. Brands
  3. Morphy Richards Manuals
  4. Vacuum Cleaner
  5. Ecovac 70096 Rev 2 (Page 1)
  6. Instructions manual
Morphy Richards Ecovac 70096 Rev 2 (Page 1) Instructions Manual

Morphy Richards Ecovac 70096 Rev 2 (Page 1) Instructions Manual

Ecovac cylinder vacuum cleaners
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Ecovac cylinder vacuum cleaners
Please read and keep these instructions
getting the best from your
new cleaner...
If your cleaner is not picking up as well as it
should, please check
• Filters
It is important that the filter is cleaned regularly to allow air through
the appliance. Shake to remove dust, the filter can also be washed
in warm water and left to air dry.
IMPORTANT - Ensure filter is totally dry before refitting into
machine.
• Blockages
Check the hose, handle and tools for blockages.
• Overheating protection
The cleaner automatically cuts off in the event of overheating
caused by blocked hoses / filters. Remove plug, clear blockage
and allow 15 minutes for the cleaner to automatically reset.
www.morphyrichards.co.uk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ecovac 70096 Rev 2 (Page 1) and is the answer not in the manual?

Questions and answers

Related Manuals for Morphy Richards Ecovac 70096 Rev 2 (Page 1)

Summary of Contents for Morphy Richards Ecovac 70096 Rev 2 (Page 1)

  • Page 1 Ecovac cylinder vacuum cleaners Please read and keep these instructions getting the best from your new cleaner... If your cleaner is not picking up as well as it should, please check • Filters It is important that the filter is cleaned regularly to allow air through the appliance.

  • Page 2: Important Safety Instructions

    • Repairs to electrical appliances are only to be undertaken by trained personnel. Unprofessional repairs can be dangerous for users. • Use only genuine Morphy Richards spare parts and accessories. • If the electrical cable becomes damaged the complete cable assembly must be replaced.
  • Page 3 Features ⁄ Dust compartment cover ¤ Opening for suction hose ‹ Dust compartment lock button › Tool storage compartment cover fi Airbox fl Reusable washable filter ‡ Safety lock · Slot for airbox location ‚ Variable power ¤ › ⁄ „...

  • Page 4: Tools And Accessories

    Suction hose Snap the 360° rotating head on the suction hose into the suction hose opening on the vacuum cleaner. The appropriate cleaning tool can be attached directly to the other end of the suction hose or the connecting tube can be used between the suction hose and the tool.
  • Page 5 The vacuum cleaner cuts out automatically when: • The floor nozzle or tubes become blocked • Using the vacuum cleaner with a full air box. • The airbox filter is very dirty • The motor protection filter is very dirty •...
  • Page 6 Switching off Switch off the appliance. Remove the plug from the mains supply and rewind the power cable using the cable rewind foot switch. CAUTION: When using the cable rewind, always hold the plug as the cable will rewind quickly. Emptying the air box To maintain the performance of your vacuum cleaner the airbox must be emptied regularly...
  • Page 7 Cleaning the airbox filter IT IS IMPORTANT TO CLEAN THE FILTER TO MAINTAIN PERFORMANCE, EVERY TIME THE AIRBOX IS EMPTIED. • After emptying the dust, twist the filter anti- clockwise to remove as shown. • Tap the filter over a dustbin to remove excess dust.

  • Page 8: Cleaning The Motor Protection Filter

    Cleaning the motor protection filter The motor protection filter is accessible from the dust compartment only when the airbox has been removed first. WARNING: NEVER USE THE APPLIANCE WITHOUT THE MOTOR PROTECTION FILTER INSTALLED, OTHERWISE DAMAGE TO THE MOTOR MAY OCCUR WHICH WOULD NOT BE COVERED BY THE GUARANTEE.

  • Page 9: Cleaning The Exhaust Air Filter

    Replacement Parts Helpline Number 0870 167 6635. Storage When not in use the vacuum cleaner can be stored in an upright position. To do this, rotate the floor nozzle until the lug on the back of the brush can be fitted into the tube park slot...

  • Page 10: Cleaning And Maintenance

    Cleaning and maintenance Unplug from the mains before cleaning. The dust compartment and all accessories can be cleaned using a damp cloth or a non- abrasive domestic cleaner and wiped dry. To keep the underside of the floor nozzle clean, vacuum it at regular intervals using the crevice tool.
  • Page 11 36 months of original purchase, you should contact the Helpline number quoting Model number and Serial number on the product, or write to Morphy Richards at the address shown. You will be asked to return the product (in secure, adequate packaging) to the address below along with a copy of proof of purchase.

This manual is also suitable for:

Ib70096

Table of Contents