Morphy Richards Scoot bagless vacuum cleaner Instructions Manual
Morphy Richards Scoot bagless vacuum cleaner Instructions Manual

Morphy Richards Scoot bagless vacuum cleaner Instructions Manual

Goblin scoot bagless vacuum cleaner

Advertisement

Quick Links

Scoot bagless vacuum cleaner
Please read and keep these instructions
getting the best from your new
cleaner...
If your cleaner isn't picking up as well as it
should, please check
• Dust container
It is important to empty the dust container regularly, otherwise the
performance of the cleaner will be impaired.
• Filters
It is important that the filters are cleaned regularly to allow air
through the appliance.The washable filters should be regularly
washed in warm water and left to air dry.
• Blockages
Check the nozzle, tubes and hose for blockages.
• Floor nozzle
Check that the floor nozzle brushes are at the correct setting for
the surface being cleaned.
• Brushes down for hard floors
• Brushes retracted for carpets / rugs.
www.morphyrichards.co.uk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Scoot bagless vacuum cleaner and is the answer not in the manual?

Questions and answers

Summary of Contents for Morphy Richards Scoot bagless vacuum cleaner

  • Page 1 Scoot bagless vacuum cleaner Please read and keep these instructions getting the best from your new cleaner... If your cleaner isn’t picking up as well as it should, please check • Dust container It is important to empty the dust container regularly, otherwise the performance of the cleaner will be impaired.
  • Page 2: Important Safety Instructions

    Important safety instructions The use of any electrical appliance requires the following of common sense safety rules. Primarily there is danger of personal injury and secondly danger of damage to the appliance and property. These are indicated in the text by the following two conventions: WARNING: Danger of personal injury.
  • Page 3 Features ⁄ Hose inlet ¤ Dust container release button ‹ Carrying handle › Handle on cover fi Dust container fl Stair lock bracket ‡ On/off button · Cable rewind button ¤ › ⁄ fi ‡ ‚ Accessories you should have ‚...
  • Page 4: Crevice Tool

    Assembly Step 1 Hose ‰ Â Insert the hose end ⁄ until it clips securely into position. Step 2 Telescopic tube Certain models only 1 Press the release button on the tube and extend the tube to the required length. 2 Attach the telescopic tube to the handle of the hose.
  • Page 5: Operation

    Operation 1 Ensure the full length of cable is pulled out. 2 Plug into the electrical socket. 3 Switch the cleaner on using the on/off button ‡. Controlling suction power Suction power can be adjusted using the Á handle suction control .
  • Page 6: Emptying The Dust Container

    Emptying the dust container IMPORTANT: To obtain best results from your cleaner it is important to empty the dust container and clean the filters regularly, otherwise the airflow and suction power will be reduced. If the dust container is not full and performance deteriorates, first check if there are any blockages in the accessories or tubes.
  • Page 7: Cleaning The Filter

    Cleaning the filter Everytime the dust container is emptied the filter should be cleaned. Pull the tabs at the side of the mesh filter cover to remove the pleated filter cover. Use the brush attached to the rear of the filter to brush the fine dust from between the filter pleats.
  • Page 8: Cleaning The Motor Protection Filter

    Cleaning the motor protection filter The motor protection filter should be cleaned regularly by sliding out of its location and shaking rigorously to dislodge any dust. The motor protection filter can also be washed in warm water and left to air dry. IMPORTANT: Do not use detergents and ensure filter is thoroughly dry before re-inserting into the machine.
  • Page 9: Storage And Maintenance

    Unplug the cleaner from the mains before cleaning. Press the cable rewind button rewind the cord into the storage unit. The vacuum cleaner and all the accessories can be cleaned using a damp cloth and wiped dry. To keep the underside of the floor nozzle clean, vacuum it at regular intervals using the crevice tool.
  • Page 10 Your two-year guarantee • It is important to retain the retailers receipt as proof of purchase. Staple your receipt to this back cover for future reference. Please quote the following information if the product develops a fault. These numbers can be found on the base of the product. Model no.

This manual is also suitable for:

Ib70280

Table of Contents