Page 1
PremAir cylinder vacuum cleaner Please read and keep these instructions getting the best from your new cleaner... If your cleaner isn’t picking up as well as it should, please check • Dustbags It is important to replace them, otherwise the performance of the cleaner will be impaired •...
Do not attempt this task the appropriate one fitted. yourself, contact Morphy Richards using WARNING: The plug removed from the helpline number. the mains lead, if severed, must be...
Page 3
Features ⁄ Dust compartment cover Á ‘Bag full’ indicator ¤ Opening for suction hose Ë Suction hose with air flow control* ‹ Dust compartment lock button È Suction hose with comfi-grip handle* › Tool storage compartment cover Í Floor nozzle fi...
Tools and Standard accessories Application accessories Curtains and delicate fabrics Standard floor nozzle This nozzle is suitable for general Textiles and purpose cleaning on a wide variety of floor upholstery coverings. Shelves and Turbo brush (certain models only) hard surfaces This nozzle is suitable for cleaning and rejuvenating cut pile carpets and is ideal for Carpets and...
Controlling suction power The suction power can be varied to suit the surface being cleaned, by using the variable power control. See table for guideline settings. Certain models only Open Closed The suction power can also be adjusted using the fingertip control on the handle. Closed: full suction Open: low suction...
Tube standby During short breaks in cleaning the tubes can be held in an upright, ‘standby’ position, whilst you move furniture for instance. IMPORTANT: Ensure that the appliance is never left unattended whilst it is switched on. Switching off Switch off the appliance. Remove the plug from the mains supply and rewind the power cable using the cable rewind foot switch.
Changing the dustbag If suction power is reduced or if the ‘dust bag full’ indicator is permanently on, the dust bag needs changing. Also check whether the suction hose, tube or nozzle are blocked. To access the dust bag, press the dust compartment release button to open the cover.
Changing the motor protection filter The motor protection filter varies by model. It is accessible from the dust compartment only when the dust bag has been removed first. IMPORTANT: Never use the appliance without the motor protection filter installed, otherwise damage to the motor may occur which would not be covered by the guarantee.
To keep the underside of the floor nozzle clean, vacuum it at regular intervals using the crevice tool. Purchasing replacement filters Use only Morphy Richards replacement filters which can be purchased from specialist retailers or by calling the number on the front page of this leaflet. Helpline If you have any difficulty with your appliance, do not hesitate to call us.
Page 10
PremAir 1800 and PremAir 1800 Trio cylinder vacuum cleaners The British Allergy Foundation considers that these products may, in proper use, reduce exposure to both House Dust Mite (Der p 1) and Cat Allergen (Fel d 1). Assessment carried out by BAF indicate that an individuals exposure can be reduced but this does not mean that an individuals allergic symptoms will necessarily diminish.
Page 11
These numbers changed or cleaned regularly. can be found on the base of the product. Morphy richards shall not be liable to replace or repair the goods under the terms of Model no. Serial no.
Page 12
For additional information on Goblin products www.morphyrichards.co.uk Morphy Richards products are intended for household use only The After Sales Division, Morphy Richards has a policy of Morphy Richards Ltd, Mexborough, continuous improvement in product South Yorkshire, England, S64 8AJ quality and design. The Company,...
Need help?
Do you have a question about the IB70041 and is the answer not in the manual?
Questions and answers