Storage Position; Motor Protection Filter - Morphy Richards IB73190 Instructions Manual

73190 Rev 1 28/4/04
Reassemble
1 Replace the filter basket ensuring that the
seal is good F. Then replace the pod
onto the main body. G
Motor protection
filter
This cleaner is fitted with a motor
protection filter. NEVER USE THE VACUUM
CLEANER WITHOUT THIS IN PLACE.
To clean the motor protection filter
1 Remove the filter from the filter grille. H
2 Rinse the filter in lukewarm water and
DRY THE FILTER COMPLETELY.
3 Put the filter back into the filter grille and
reassemble.
F
G
6:23 PM Page 6
6

Storage position

The vacuum cleaner can be stored in an
upright position. slide the storage hook „
into the slot on the base of the product Â
and the tubes, hose and floor nozzle are held
securely. I
H
I