MADER POWER SF8A220 Manual page 54

Make sure it completely sits on the spindle. The line will automatically come
out when you re-start the string trimmer.
• Press the two clips on the spool cover and put it back into the spool. Make sure
the two clips fit the two recess places. The spool cover needs to be tightly fit on
the spool (See fig.16).
MAINTENANCE
WARNING: ln order to avoid personal injury and the risk of fire and electric
shock, remove the battery pack before adjusting, inspecting, or cleaning the
string trimmer.
C
LEANING THE SPOOL HEAD
Remove the battery pack.
• Stop the motor and remove the battery pack.
• Clean dirt and debris from the spool head using a damp cloth with a mild
detergent.
NOTE: Wipe off the housing and the plastic components using a moist, soft cloth. Do
not use strong solvents or detergents on the plastic housing or plastic components.
Certain household cleaners may cause damage, and may cause a shock hazard.
G
ENERAL INSPECTION
Regularly check that all the fixing screws are tight. They may vibrate loose over time.
S
TORAGE
1. Store the trimmer away from direct sunlight.
2. Do not store in a nylon bag as this can encourage the formation of mould.
3. Store it in a well-ventilated place that is inaccessible to children.
4. Keep away from corrosive agents such as garden chemicals and de-icing salts.
5. At the end of the season, give the trimmer an overall cleaning and a thorough
check.
B (N I
ATTERY OT NCLUDED
• Store the battery pack fully charged.
• Once the charging light turns green, remove the battery from the charger and
disconnect the charger from the outlet.
• Do not store the battery pack on the tool.
• After charging, the battery pack may be stored in the charger, as long as the
charger is not plugged in.
C
HARGER MAINTENANCE
• Keep the charger clean and clear of debris. Do not allow foreign material to get
into the recessed cavity or onto the contacts. Wipe the charger clean with a dry
)
(N I )
OT NCLUDED
53