MADER POWER SF8A220 Manual page 48

U
NPACKING
Unpack the string trimmer and all its parts, and compare against the list below. Do not
discard the carton or any packaging materials.
List of parts:
Battery grass trimmer with spool / Guard / Protector / Screw x1pc / Hex Key
ASSEMBLY INSTRUCTIONS
WARNING: Do not use this product if any parts on the packing list are already
assembled to your product when you unpack it. Parts on this list are not
assembled to the product by the manufacturer and require customer installation. Use
of a product that may have been improperly assembled could result in serious personal
injury.
WARNING: If any parts are damaged or missing do not operate this product
until the parts are replaced. Use of this product with damaged or missing parts
could result in serious personal injury.
WARNING: Do not attempt to modify this product or create accessories not
recommended for use with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading to possible serious personal
injury.
WARNING: Do not connect to power supply until assembly is complete. Failure
to comply could result in accidental starting and possible serious personal
injury.
WARNING: Before assembly, make sure that the tool is switched off and the
battery has been removed.
C
ONNECTING THE UPPER SHAFT AND THE TELESCOPIC SHAFT
• Align the shaft ends with each other and assemble the upper shaft (M) into the
telescopic shaft (K) (See fig. 1).
• Then use the key to tighten the bolt (See fig. 2).
Fig. 1
Fig. 2
47