Operating Conditions And Working Environment; Before Starting Work - IPOTOOLS WIG INV185PACDC IGBT Digital Original Instruction Manual

OPERATING CONDITIONS AND WORKING ENVIRONMENT

1. Operating conditions:
Voltage, voltage source: AC 220 V/230V/240V,
•
Frequency: 50/60Hz,
•
Reliable grounding.
•
2. Work environment
Relative humidity: not more than 90%,
•
Ambient temperature: -10 ℃ ~ 40 ℃,
•
• The welding site must not contain any harmful gas, chemicals, mold and flammable
substances, explosive and corrosive media. The welder must not be subjected to any
vibration or other disturbances,
Avoid rain and water, work in such circumstances is prohibited.
•

BEFORE STARTING WORK

Before welding, it is necessary to read and understand the instructions of use,
•
Check the machine for any defects or damage,
•
To ensure the safety of persons and equipment, it is necessary to properly install the
•
earthing with a 4 mm2 conductor, depending on the requirements of the power supply
system,
Welding must take place in a dry and well-ventilated area. Objects in the vicinity must
•
be at least 0,5 m away from the appliance,
Check that all cables are tightly fastened / connected,
•
• The appliance must not be moved while the appliance is switched on and welding is
in progress.
The appliance must be maintained, used, and operated by a qualified person,
•
• Distribution board current: less than 40A.
INSTRUCTION MANUAL
TIG INV185PACDC Welding machine
7