Safety Measures - IPOTOOLS WIG INV185PACDC IGBT Digital Original Instruction Manual

Dear customer!
Thank you for choosing to purchase our welding machine. Please read the instructions
carefully for safe use and trouble-free operation of the device. Follow the instructions strictly
for safe work!

SAFETY MEASURES

Caution: Improper use of any welding machine can result in injury or death.
CONNECT THE WELDING APPLIANCE ONLY TO THE APPROPRIATE ENERGY
•
SOURCE. This information is given on the rating plate on the welding machine. When
welding outdoors, use only an extension cord designed for such use.
WORK WITH THE APPLIANCE ONLY ON A DRY AREA AND ON A SOLID
•
GROUND. Make sure the work area is clean and tidy.
MAKE SURE THERE ARE NO FLAMMABLE SUBSTANCES IN THE WORKING
•
AREA.
KEEP CLEAN CLOTHES WITHOUT TRACE OF GREASE OR OIL AT WORK.
•
MAKE SURE THE CABLES DO NOT COME INTO CONTACT WITH GREASE OR
•
OIL and never wrap them around your shoulders.
SAFE WORK WITH CLAMPS or in other means, do not overdo it.
•
NEVER ESTABLISH AN ARCH ON A PRESSURE GAS TANK.
•
THE UNINSULATED PART OF THE ELECTRODE HOLDER SHOULD NEVER
•
TOUCH THE GROUND WHILE THE CURRENT IS FLOWING!
IT IS NECESSARY TO TURN OFF AND DISCONNECT THE CABLES WHEN
•
REPAIRING OR ADJUSTING THE APPLIANCE. Check the device before each use.
Use only original spare parts.
FOLLOW ALL MANUFACTURER'S RULES regarding modification, and adjustment
•
of the device.
APPROPRIATE PROTECTIVE CLOTHING AND FOOTWEAR MUST BE CARRIED
•
AT WORK. The welder should be dressed in a work suit made of non-combustible
fibbers during welding. The dress should be dry, clean, not too loose and without cut-
outs or pockets. Shoes should be closed, high. The use of gloves, a hat, a protective
mask, and a leather apron is mandatory. Low shoes, self-made fibber dresses and
short gloves are not suitable for welding.
ALWAYS WARE A WELDING MASK WITH APPROPRIATE EYE PROTECTION
•
WHEN WELDING. Sparks can cause blindness during welding, so always wear
protection under the welding mask.
BE CAREFUL OF HOT METAL PARTS, ESPECIALLY WHEN WELDING OVER
•
YOUR HEAD. Always wear head, arm, leg, and body protection.
MAKE SURE YOU HAVE A FIRE EXTINGUISHER ALWAYS AT YOUR HAND.
•
INSTRUCTION MANUAL
TIG INV185PACDC Welding machine
3