Purpose And Use - IPOTOOLS WIG INV185PACDC IGBT Digital Original Instruction Manual

INSTRUCTION MANUAL
TIG INV185PACDC Welding machine
DANGERS OF ELECTRIC CURRENT
The device can only be connected to the mains with a shielded connection cable. The fuse
must be of the same power as specified in the technical data of the device. The fuse design
must be slow.
Replace damaged torch parts, cable ground, or damaged mains connector immediately.
Replacement of parts on the network, replacement of the connecting cable can only be
performed by an authorized person. Never hold the burner under your arm or otherwise
wrapped around your body. In the event of prolonged work interruptions, switch off the
appliance and close the shielding gas supply.
In the event of an accident, immediately pull out the plug of the connecting cable!

PURPOSE AND USE

The IPOTOOLS INV185PACDC is a welding machine with three welding functions. It can be used for
DC MMA, AC TIG and DC / PULSE TIG welding. Any other use may endanger the safety of the welder
or cause the device to malfunction! The misuse of the device is not permitted! Damage to the device
resulting from use that was not in accordance with the warranty statement is not covered. With the
device it is possible to weld several materials in all positions, namely steel, aluminium and aluminium
alloys, stainless steel, titanium, copper into copper alloys. The welding current is stable and infinitely
adjustable. The appliance provides a beautiful weld, and the welding itself takes place quietly and
without spattering. The device is small in size, light and thus very useful for dynamic work, as well as
for everyday work in the workshop.
5