Special Warnings; Fire Hazard - IPOTOOLS WIG INV185PACDC IGBT Digital Original Instruction Manual

DO NOT SKIP THE MACHINE OPERATING CYCLE. The estimated cycle of the
•
welding machine is a percentage of ten minutes, with this in mind the machine can
operate safely in terms of output power.
PREVENT CHILDREN, ANIMALS AND THIRD PARTIES FROM ACCESSING THE
•
WORK AREA. When storing equipment, make sure it is out of the reach of children.
PROTECT YOURSELF AGAINST ELECTRIC SHOCK. Do not work when you are
•
tired or under the influence of drugs, alcohol, or other illicit substances. Do not allow
the body to come into contact with grounded surfaces.

SPECIAL WARNINGS:

Welding is not allowed in rooms with flammable and explosive materials,
•
it is not allowed to weld in / on containers where there were gases, oils, paints...,
•
more demanding welds should be welded only by certified welders,
•
persons with a pacemaker should consult a doctor before welding.
•
Before welding, always make sure that all regulations and instructions for safe work are met.
When welding by MIG / MAG process, the noise can be higher than 85db (A), so the worker
must wear earmuffs during welding.
Welding produces strong UV rays that can burn uncovered parts of the body.
The protective glass on the mask should be numbered 9-15 according to DIN 4647.
Do not look into the electric arc during welding, as there is a risk of instantaneous glare.
Only weld when there is another person nearby who can give you first aid in case of
injury.
People in the vicinity must follow the instructions above!
In the rooms where we weld, it must be sufficiently airy, suction is desirable. Toxic gases are
formed especially when we weld material that is galvanically coated with other metals or
materials with detergent residues. Do not weld closed containers containing flammable
liquids (petrol, oil, varnishes...) as there is a high risk of explosion!

FIRE HAZARD

Follow these instructions:
• Remove combustible materials within 5m of the welding site
Cover openings, cracks, and other objects that can trap sparks
•
Keep fire extinguishers nearby
•
After welding, inspect the welding area again
•
• Do not weld on containers with flammable liquids
Shielding gas cylinders must be protected against mechanical damage and excessive heat
(max. 50 C). cylinders must also be protected from frost.
INSTRUCTION MANUAL
TIG INV185PACDC Welding machine
4