BMW K 1600 GT Supplementary Instructions Manual page 65

The communication system
then goes to standby mode;
the green LED flashes as the
rate of one flash per second.
Note time limit
The next two steps
Make the communication sys-
tem visible
Searching for communication
system
are subject to a time limit of 60
seconds.
Consequently, they must be per-
formed one directly after the oth-
er.
BMW Motorrad recommends
reading through the instructions
for both steps before proceeding.
Making communication
system of helmet 1 visible
Simultaneously press button 2
and button 3 of helmet 1 and
hold them down until green
LED 6 doubles the rate at
which it flashes (i.e. starts
flashing at 2 Hz).
The communication system
of the helmet is now visible to
other Bluetooth devices for a
maximum of 60 seconds; the
green LED flashes at a rate of
two flashes per second.
Searching for
communication system
of helmet 1
Switch on the navigation sys-
tem.
Open "Tools" - "Settings" -
"Bluetooth" and select the "En-
abled" option.
In the "Audio" menu, select the
"Add" option and touch "OK"
to confirm.
For 60 seconds the navigation
system searches for a visible
communication system.
The navigation system displays
a list of found (and if applicable
saved) Bluetooth devices.
The communication system
is listed as a headset
identified by the designation
BMW_HELMET_II_xxxx
the string "xxxx" stands for the
ID number.
6
61
z
;