BMW K 1600 GT Supplementary Instructions Manual page 43

Consequently, they must be per-
formed one directly after the oth-
er.
BMW Motorrad recommends
reading through the instructions
for both steps before proceeding.
Making communication
system of helmet 2 visible
Simultaneously press button 2
and button 3 of helmet 2 and
hold them down until green
LED 6 doubles the rate at
which it flashes (i.e. starts
flashing at 2 Hz).
The communication system
of the helmet is now visible to
other Bluetooth devices for a
maximum of 60 seconds; the
green LED flashes at a rate of
two flashes per second.
Searching for
communication system
of helmet 2
Allow mobile phone 2 to
search for other Bluetooth
devices.
Mobile phone 2 displays a
list of found (and if applicable
saved) Bluetooth devices.
The communication system
is listed as a headset
identified by the designation
BMW_HELMET_II_xxxx
the string "xxxx" stands for the
ID number.
Select the communication sys-
tem of helmet 2.
When the prompt appears
on the display of the mobile
phone, key in the ID "0000" for
the helmet.
Pairing is confirmed by the mo-
bile phone.
Depending on the mobile
phone, it might be necessary
to confirm automatic
connection setup or complete
a final confirmation procedure.
Switching off
communication system
in helmet 2
;
Press button 2 and hold it
down until a low-pitched con-
firmation tone sounds and red
LED 4 starts flashing.
4
39
z