BMW K 1600 GT Supplementary Instructions Manual page 28

Switching off
3
communication system
in helmet 1
24
Press button 2 and hold it
down until a low-pitched con-
firmation tone sounds and red
LED 4 starts flashing.
z
The communication system
switches itself off; the red LED
flashes three times.
Switching off
communication system
in helmet 2
Press button 2 and hold it
down until a low-pitched con-
firmation tone sounds and red
LED 4 starts flashing.
The communication system
switches itself off; the red LED
flashes three times.
Switching on systems
Switch on all participating sys-
tems.
The systems recognise each
other; no further steps are ne-
cessary.
Re-establishing
connection
If pairing of the audio system
with the communication system
was successful, but the connec-
tion was not established:
Press the ON button twice in
not too rapid succession so
that the systems reconnect.