Pairing, audio system
with communication
system of the helmet
Switching on audio
system
Switch on the ignition.
If the audio system does not
come on automatically, press
the ON button.
Deleting pairing entries
Settings
Call up the
Audio
menu and select
BT pairing
.
Unpair all
Select
Confirm
to delete the pair-
ing entries.
-
Switching on
communication system
and
Press button 2 and hold it
down until a high-pitched con-
firmation tone sounds and
green LED 6 starts flashing.
The communication system
initialises itself; the green LED
slow-flashes.
The communication system
then goes to standby mode;
the green LED flashes as the
rate of one flash per second.
5
43
z